Galfab Above Frame EX Hoist (AFEX Series)

• 10″ x 4″ x 3/8″ Main Frame Tube
• 1/2″ x 3″ Wear Strip on Top
• 1/2″ x 3″ Spacer Bar on the Bottom Side of the Mainframe
• 3″ x 3″ x ¼ inch Sub-Frame
• All Working Points Greaseable
• 2 1/2″ Diameter Rear Hinge
• Pintle Ready Apron
• Auto Fold Forward DOT Bumper
• 1″ Spring Loaded Container Locks
• 2 1/2″ Diameter Lift Cylinder Shafts
• 12″ Diameter Vertical Sheave and 10″ Horizontal Sheaves
• 3/8 inch x 3 inch Winch Cylinder Rod Covers
• 6 Inboard and Outboard Supported Outside Rollers
• Container Long Sill Supports on Rear of Hoist Mainframe
• 30 Gallon Oil Reservoir with Sight and Temperature Gauge
• 25 Micron Filtration
• Inside and Outside Controls
• Dual Inboard 6 inch Diameter Winch Cylinders
• Dual Outboard 6 inch Diameter Lift Cylinders
• Galfab Patented “Tricep” Lift Assist Cylinder
• LED Lighting System
• 7/8” Cable with Heavy Duty Swivel Eye Hook
• 80 inch Extendible Tail
• No DOT bumper
• Hoist Up Alarm
• Backup Alarm

• Pintle Hook Options
• PTO
• On Board Scale Systems
• Work Lights
• Rear View Camera Systems
• Ratchet Tie Down Straps
• Tool Boxes
• Auxiliary Stops
• Poly or Steel Fenders
• Aluminum Fenders
• Tarping Systems
• “The Hooker” Hold on System
• Integrated hydraulics can be used, if hydraulic tarping system is used
• Also available in short extendible tail

* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly.

CAUTION: This Equipment Should be Operated by Properly Trained Personnel. Improper Use, Misuse, or Lack of Maintenance Could Cause Injury to Persons or Property. Photos used in this brochure are illustrative only. We reserve the right to make changes at any time without notice. Information contained within this literature is believed to be the most accurate available at the time of printing.