Pinnacle Pool Tanks

Condition: Build to Order

Pinnacle’s pool tanks come in four standard sizes: 10,000 BBL, 24,000 BBL, 35,000 BBL and 42,000 BBL.

Dimensions

  • 10,000 BBL (420,000 gallons)
  • 13 Panels
  • Height: 12 Feet
  • Wide: 20 Feet
  • Diameter: 81 Feet
  • Panel Weight: 5,300 lbs. each (68,900 lbs. total)

Design Specifications

  • Panel: 1/4” Steel Plate (ASTM A36)
  • Outer Framing: 4” x 4” x 1/4″ Outer tube frame on panel (ASTM A500)
  • Inner Framing: 3” x 3” x 1/4″ Inner Tube frame on panel (ASTM A500)
  • Panel Connection: Fourteen (14) 1-¼” steel knuckle plates on “Male” side with 2-¼” holes (ASTM A36),
  • Twelve (12) 1-¼” steel knuckle plates on “Female” side with 2-¼” holes (ASTM A36)
  • Connecting Pins: Six (6) 2” diameter steel connecting pins (ASTM A36)
  • Lifting Connections: 3” x 3” x 3/8” structural angle lifting bracket for panel telehandler plate,
  • 3/4” dia. Round bar lifting rods in top corners,
  • 3 D-rings per panel; One on the top center and one on each vertical tube.
  • Liner Clamps: 3 bolt-on steel clamps per panel (39 Total)
  • Feed Lines: 4 – 4” 150# ANSI flanges
  • Suction Tube: 1 – 12” suction tube with sump and vacuum breaker
  • Stairway & Ladder Assembly: 1 – 24” wide staircase with non-slip steps with appropriate handrails and ascent angle to comply with all OSHA requirements.
  • Panel Stands 4 each
  • Exterior/Interior Blast SSPC-SP-6 Commercial
  • Polyurethane 4 – 5 Mils

Dimensions

  • 24,000 BBL (1,008,000 gallons)
  • 20 Panels
  • Height: 12 Feet
  • Wide: 20 Feet
  • Diameter: 121 Feet
  • Panel Weight: 5,300 lbs. each (106,000 lbs. total)

Design Specifications

  • Panel: 1/4” Steel Plate (ASTM A36)
  • Outer Framing: 4” x 4” x 1/4″ Outer tube frame on panel (ASTM A500)
  • Inner Framing: 3” x 3” x 1/4″ Inner Tube frame on panel (ASTM A500)
  • Panel Connection: Fourteen (14) 1-¼” steel knuckle plates on “Male” side with 2-¼” holes (ASTM A36),
  • Twelve (12) 1-¼” steel knuckle plates on “Female” side with 2-¼” holes (ASTM A36)
  • Connecting Pins: Six (6) 2” diameter steel connecting pins (ASTM A36)
  • Lifting Connections: 3” x 3” x 3/8” structural angle lifting bracket for panel telehandler plate,
  • 3/4” dia. Round bar lifting rods in top corners,
  • 3 D-rings per panel; One on the top center and one on each vertical tube.
  • Liner Clamps: 3 bolt-on steel clamps per panel (60 Total)
  • Feed Lines: 4 – 4” 150# ANSI flanges
  • Suction Tube: 1 – 12” suction tube with sump and vacuum breaker
  • Stairway & Ladder Assembly: 1 – 24” wide staircase with non-slip steps with appropriate handrails and ascent angle to comply with all
    OSHA requirements.
  • Panel Stands 4 each
  • Exterior/Interior Blast SSPC-SP-6 Commercial
  • Polyurethane 4 – 5 Mils

Dimensions

  • 42,000 BBL (1,764,000 gallons)
  • 26 Panels
  • Height: 12 Feet
  • Wide: 20 Feet
  • Diameter: 158 Feet
  • Panel Weight: 5,300 lbs. each (137,000 lbs. total)

Design Specifications

  • Panel: 1/4” Steel Plate (ASTM A36)
  • Outer Framing: 4” x 4” x 1/4″ Outer tube frame on panel (ASTM A500)
  • Inner Framing: 3” x 3” x 1/4″ Inner Tube frame on panel (ASTM A500)
  • Panel Connection: Fourteen (14) 1-¼” steel knuckle plates on “Male” side with 2-¼” holes (ASTM A36),
  • Twelve (12) 1-¼” steel knuckle plates on “Female” side with 2-¼” holes (ASTM A36)
  • Connecting Pins: Six (6) 2” diameter steel connecting pins (ASTM A36)
  • Lifting Connections: 3” x 3” x 3/8” structural angle lifting bracket for panel telehandler plate,
  • 3/4” dia. Round bar lifting rods in top corners,
  • 3 D-rings per panel; One on the top center and one on each vertical tube.
  • Liner Clamps: 3 bolt-on steel clamps per panel (78 Total)
  • Feed Lines: 4 – 4” 150# ANSI flanges
  • Suction Tube: 1 – 12” suction tube with sump and vacuum breaker
  • Stairway & Ladder Assembly: 1 – 24” wide staircase with non-slip steps with appropriate handrails and ascent angle to comply with all
    OSHA requirements.
  • Panel Stands 4 each
  • Exterior/Interior Blast SSPC-SP-6 Commercial
  • Polyurethane 4 – 5 Mils

Please contact one of the EMP Partner(s) below:
Pinnacle Manufacturing (HQ)
Call: (256) 840-8031
512 Henderson Avenue West
Boaz, Alabama
Pinnacle Manufacturing
Call: (801) 731-4681
791 South 9300 West
Ogden, Utah

Recently Viewed