Pac-Mac RLM Series (Rear Loader) Refuse Truck

Pac-Mac

Pac-Mac RLM Series (Rear Loader) Refuse Truck

Condition: Build to Order

Make: Pac-Mac

Partners: Carolina Environmental Systems (CES), Municipal Equipment, Inc.

The RLM Series is Pac-Mac’s medium size rear loader. This unit is available in 11, 13, 16 cubic yards with a compaction rate of 800-900 lbs/yd. Our rear loader truck is engineered using the most advanced computer modeling systems, proving that Pac-Mac is committed to providing the highest quality products in the solid waste industry.

Description	RLM 11	RLM 13	RLM 16
Capacity	11 yd³	13 yd³	16 yd³
Hopper Capacity	2.6 yd³	2.6 yd³	2.6 yd³
Body Weight (Body Shell Only)	3,187 lb	3,396 lb	3,709 lb
Body Weight (Complete Unit, Less Options)	10,320 lb	10,530 lb	10,850 lb
Hopper Inside Width	80″	80″	80″
Sidewalls (Curved Shell)	11 ga high tensile steel	11 ga high tensile steel	11 ga high tensile steel
Floor (Single Sheet, Flat)	3/16″ high tensile steel	3/16″ high tensile steel	3/16″ high tensile steel
Roof (Curved Shell)	11 ga high tensile steel	11 ga high tensile steel	11 ga high tensile steel
Ejection Panel Face	11 ga high tensile steel	11 ga high tensile steel	11 ga high tensile steel
Hopper	1/4″ 100 ksi T-1	3/16″ 100 ksi T-1 (1/4″ T-1 option)	3/16″ 100 ksi T-1 (1/4″ T-1 option)
Packer Panel Face	3/16″ 100,000 PSI (T-1)	3/16″ 100,000 PSI (T-1)	3/16″ 100,000 PSI (T-1)
Slide Panel Face	3/16″ high tensile steel	3/16″ high tensile steel	3/16″ high tensile steel
Hopper Sides	3/16″ T-1 steel (lower tailgate); 10 ga high tensile steel (upper tailgate)	3/16″ T-1 steel (lower tailgate); 10 ga high tensile steel (upper tailgate)	3/16″ T-1 steel (lower tailgate); 10 ga high tensile steel (upper tailgate)
Hydraulic Cylinder Ejector	(1) Multi-stage 5.5″ bore	(1) Multi-stage 5.5″ bore	(1) Multi-stage 5.5″ bore
Hydraulic Cylinder Tailgate	(2) 3″ bore; 1.75″ rod; 30.5″ stroke	(2) 3″ bore; 1.75″ rod; 30.5″ stroke	(2) 3″ bore; 1.75″ rod; 30.5″ stroke
Hydraulic Cylinder Slide	(2) 4.5″ bore; 3.5″ rod; 27″ stroke	(2) 4.5″ bore; 3.5″ rod; 27″ stroke	(2) 4.5″ bore; 3.5″ rod; 27″ stroke
Hydraulic Cylinder Packer	(2) 4.5″ bore; 3.5″ rod; 27″ stroke	(2) 4.5″ bore; 3.5″ rod; 27″ stroke	(2) 4.5″ bore; 3.5″ rod; 27″ stroke
Hydraulic Shutoff Valve	Ball	Ball	Ball
Hydraulic Packing Controls Valve	Sectional spool	Sectional spool	Sectional spool
Hydraulic Ejector/Tailgate Raise Valve	Sectional spool	Sectional spool	Sectional spool
Operating Pressure	2,200 psi	2,200 psi	2,200 psi
Maximum Operating Pressure	2,400 psi	2,400 psi	2,400 psi
Gallons Per Minute	35-38 GPM	35-38 GPM	35-38 GPM
Reservoir	50 gal.	50 gal.	50 gal.
Packing Cycle Time (Complete)	17-19 sec	17-19 sec	17-19 sec
Packing Cycle Time (Reload)	3 sec	3 sec	3 sec
Compaction Rate	800-900 lb/yd	800-900 lb/yd	800-900 lb/yd