Excel Manufacturing EX Series Balers
The EX Series balers are excellent for paper, cardboard, newspaper, aluminum can, tin can, PET and HDPE. They are also well-suited for recycling paper and other recyclable products, and produce the best mill-sized bales without preconditioning. Excel’s EX Series balers are designed to be the most durable, efficient, and productive closed-end single ram baler in the industry.
Features
- Hydraulic Door Latch (EX63 baler only)
- Regenerative Circuit (EX63 baler only) Reduces cycle time by 17 seconds
- The EX62 baler is manufactured standard with either left-hand or right-hand door swing
- 20 HP TEFC Motor, Standard Voltage – 208, 230, 460 Volt, 60 Hertz, 3 Phase
- Horsepower limited Pressure Compensated Piston Pump
- Removable Shear Blade with Four Cutting edges
- Six Fully Guided Wire Tie Slots
- Automatic Bale Sizing System
- Automatic Shear Jam Correction
- Short Stroke Feature to Reduce Cycle Time
- Excel’s 1-2-3 Warranty (1 Year Labor, 2 Year Parts, 3 Year Structural & Cylinder) (U.S.A. only)
- Complete with MV32 Hydraulic Oil
- NEMA 12 rated Enclosures and Controls
- Remote Controls – According to Door Swing
- Safety Interlock Door with Decompression
- Clean-out Tool, Grease Gun, and Extra Touch-up Paint
- One Bundle of 12 x 13 Single Loop Wire Ties
- Sandblasted, Primed, and Painted Excel Blue for Long Lasting Durability
- Standard Hopper
- Lower Photo Eye
- UL, CUL Approved (CE Available)
- PLC Controlled Operation
- Available with an Excel above ground or in-ground conveyer for a turn-key system
Specifications
Structural
- HEIGHT : 62” Loading 52 1/2” Frame (158cm)
- LENGTH : 179” (455cm)
- WIDTH : 77” (196cm)
- CHAMBER : 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
- FEED OPENING : 54”W (137cm) x 35”L (89cm)
- BALER SHIPPING WEIGHT : 18,960 lbs. (8,600kg) (as shown)
Perfomance Data
- PUMP : 34 gal. (130 liters) Pressure Compensated HorsePower Limited Piston Pump, 4,000 PSI Rated
- DIRECTIONAL VALVE : D08 Pattern, Hi-Flow Cushion Shift Design
- CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Strokex 4” (10cm) Hard Chrome Rod
- OIL RESERVOIR : 105 gal. (399 liters)
- DOOR LATCH CYL. : 4” (10cm) Bore x 6” (15cm) Strokex 2” (5cm) Rod
- MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
- ENCLOSURE : NEMA 12 Rated, UL Approved
- CONTROLS : UL/CUL/CE Approved, NEMA 12 Rated
- HYD SYSTEM PRESSURE : 4,000 PSI (276 Bar)
- OVERALL PLATEN FORCE : 159,400 lbs. (72 tonne)
- PLATEN PSI : 92 PSI (6.33 BAR)
- CYCLE TIME : 29 sec. – 21 sec. Short Stroke
- TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)
Bale Weights
- OCC : 1,200 lbs. (544kg) TPH 3.3
- MAGAZINES : 2,000 lbs. (907kg) TPH 7.5
- NEWSPAPER : 1,500 lbs. (680kg) TPH 6.4
- OFFICE PAPER : 1,600 lbs. (726kg) TPH 6.8
- HDPE : 1,100 lbs. (499kg) TPH 2.3
- PET : 800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)
- ALUMINUM CANS : 625 lbs. (284kg) TPH 2.3
- TIN CANS : 1,200 lbs. (544kg) TPH 4.5
Applications
The Excel EX62 & EX63 Series Balers bale the following materials:
- Office Paper
- Newspaper
- OCC
- Magazines
- PET
- HDPE
- Aluminum Cans
- Tin Cans
- Plastic Film
- Carpet Padding
- Textiles
- Other materials
Features
- Hydraulic Door Latch
- Regenerative Circuit – Reduces cycle time by 17 seconds
- 20 HP TEFC Motor, Standard Voltage – 208, 230, 460 Volt, 60 Hertz, 3 Phase
- Horsepower limited Pressure Compensated Piston Pump
- Removable Shear Blade with Four Cutting edges
- Six Fully Guided Wire Tie Slots
- Automatic Bale Sizing System
- Automatic Shear Jam Correction
- Short Stroke Feature to Reduce Cycle Time
- Excel’s 1-2-3 Warranty (1 Year Labor, 2 Year Parts, 3 Year Structural & Cylinder) (U.S.A. only)
- Complete with MV32 Hydraulic Oil
- NEMA 12 rated Enclosures and Controls
- Remote Controls – According to Door Swing
- Safety Interlock Door with Decompression
- Clean-out Tool, Grease Gun, and Extra Touch-up Paint
- One Bundle of 12 x 13 Single Loop Wire Ties
- Sandblasted, Primed, and Painted Excel Blue for Long Lasting Durability
- Large Hopper – Feed opening twice the size of the standard EX63
- Lower Photo Eye
- UL, CUL Approved (CE Available)
- PLC Controlled Operation
- Available with an Excel above ground or in-ground conveyer for a turn-key system
Specifications
Structural
- HEIGHT : 100 1/2 ” Loading
- LENGTH : 283″
- WIDTH : 78 5/8″
- CHAMBER
- FEED OPENING : 70″L x 54 1/2″ W
- SHIPPING WEIGHT : 20,000
Performance Data
- PUMP : 34 gal. (130 Liters) Pressure CompensatedHorse Power Limited Piston Pump4,000 PSI Rated
- DIRECTIONAL VALVE : D08 Pattern, High Flow Cushion Shift
- CYLINDERS : (2) 6″ (15cm) Bore x 124″
- OIL RESERVOIR : 105 gal. (399 Liters)
- DOOR LATCH CYL
- MOTOR : 20 HP TEFC
- ENCLOSURE
- CONTROLS
- HYD SYSTEM PRESSURE : 4,000 PSI (276 Bar)
- OVERALL PLATEN FORCE : 159,000 Lbs.
- PLATEN PSI : 92 PSI
- CYCLE TIME
- TARGET BALE SIZE : 60″L x 48″W x 30″H
Bale Weights
- FOAM :1,200-1,600 lbs
Applications
The Excel EX63F Balers bale the following materials:
- Foam
- Large cardboard boxes
Features
- (2) 6″ (15.24 cm) Cylinders (EX66 baler only)
- (2) 6.5″ (16.51 cm) Cylinders (EX77 baler only)
- Non-Ferrous Hopper (EX77 baler only)
- Remote Controls on Pedestal (EX77 baler only)
- Hardox® 400 Replaceable Wear Liners
- The EX66 & EX77 balers are manufactured standard with a patented, hydraulic, vertical lifting door
- 20 HP TEFC Motor, Standard Voltage – 208, 230, 460 Volt, 60 Hertz, 3 Phase
- Horsepower Limited Pressure Compensated Piston Pump
- Removable, Turnable Serrated Shear Blade with 32 Cutting Points
- Five Fully Guided Wire Tie Slots
- Automatic Shear Jam Correction
- Automatic Bale Sizing System
- Short Stroke Feature to Reduce Cycle Time
- 29 Second Dry Cycle Time/21 Time Short Stroke (EX66 baler only)
- Excel’s 1-2-3 Warranty (1 Year Labor, 2 Years Parts, and 3 Years Structural and Cylinder) (EX66 baler only)(U.S.A. only)
- 1 Year Parts and Labor (EX77 baler)
- Complete with MV32 Hydraulic Oil
- NEMA 12 rated Closures and Controls
- Full Bale Ejection
- Full Platen Penetration
- Clean-out Tool and Extra Touch-up Paint
- One Bundle of 12 x 13 Single Loop Wire Ties
- Sandblasted, Primed, and Painted Excel Blue for Long Lasting Durability
- Standard Hopper
- Lower Photo Eye
- UL, CUL Approved (CE Available)
- PLC Controlled Operation
- Available with an Excel above ground or in-ground conveyer for a turn-key system
Specifications
Structural
- HEIGHT : 100 1/2 ” Loading
- LENGTH : 283″
- WIDTH : 78 5/8″
- CHAMBER
- FEED OPENING : 70″L x 54 1/2″ W
- SHIPPING WEIGHT : 20,000
Performance data
- PUMP : 34 gal. (130 Liters) Pressure CompensatedHorse Power Limited Piston Pump4,000 PSI Rated
- DIRECTIONAL VALVE : D08 Pattern, High Flow Cushion Shift
- CYLINDERS : (2) 6″ (15cm) Bore x 124″
- OIL RESERVOIR : 105 gal. (399 Liters)
- DOOR LATCH CYL
- MOTOR : 20 HP TEFC
- ENCLOSURE
- CONTROLS
- HYD SYSTEM PRESSURE : 4,000 PSI (276 Bar)
- OVERALL PLATEN FORCE : 159,000 Lbs.
- PLATEN PSI : 92 PSI
- CYCLE TIME
- TARGET BALE SIZE : 60″L x 48″W x 30″H
Bale Weights *
- FOAM :1,200-1,600 lbs
Applications
The Excel EX77 Series Baler bale the following materials:
- Office Paper
- Newspaper
- OCC
- Magazines
- PET
- HDPE
- Aluminum Cans
- Tin Cans
- Plastic Film
- Carpet Padding
- Textiles
- Aluminum siding
- Tin
- Insulated Wire
- Radiators
- Other Light Non-Ferrous Materials
Please contact one of the EMP Partner(s) below:
